A. To remove door, pull down the quick-release lever as shown in
Figure 1A
while removing the door.
B. To re-attach the door, pull down the quick-release lever while inserting the door hinge pins into the pin holes.
Figure 1
.
Release the lever when the upper hinge pin is aligned with the upper hinge pin hole-this will secure the door.
Quick-Release Door Hinge Operation
Quick-Release
Lever
Door
Upper Hinge
Pin Hole
Hinge Pin
Figure 1A
●
Read this owners manual before assembly or operation
Safety
Assembly / Setup
Phillips Head
Screwdriver
Tools Required:
Figure 1B
Acorn Nut
To raise
handle-side
of door
To lower
handle-side
of door
Bottom of Door
0103148XR6 Page 2 of 9
A. To remove door, pull down the quick-release lever as shown in
Figure 1A
while removing the door.
B. To re-attach the door, pull down the quick-release lever while inserting the door hinge pins into the pin holes.
Figure 1
.
Release the lever when the upper hinge pin is aligned with the upper hinge pin hole-this will secure the door.
Quick-Release Door Hinge Operation
A. To move the rack rails to a different mounting position, remove the 1/4-20 x 5/8" PHM screws
and re-attach in the new position as shown in
Figure 2
.
Changing Rack-Rail Position
Figure 1
Quick-Release
Lever
Door
Hinge Pin
Lower Hinge
Pin Hole
Upper Hinge
Pin Hole
Hinge Pin
Figure 1A
Figure 2
Rear Rail Position
Front Rail Position
1/4-20 x 5/8"
PHM screws
Read this owners manual before assembly or operation
Safety
Assembly / Setup
Phillips Head
Screwdriver
Tools Required:
Note:
If the door appears to be misaligned, a slight adjustment can
be made to the bottom hinge-side of the door.
Figure 1B
.
1. Using the quick-release lever, remove the door.
2. Slightly loosen the acorn nut on the bottom corner of the door
with a 3/8" or adjustable wrench and Phillips screwdriver.
3. Reposition the acorn nut and screw as required (repositioning
the acorn nut toward the rear of the door will lift the handle-
side of the door upward.)
4. After adjustment, be sure the nut is tightened securely. Re-
attach door and check alignment. Repeat this procedure if
necessary.
Figure 1B
Acorn Nut
To raise
handle-side
of door
To lower
handle-side
of door
Bottom of Door
