Important
Before you begin, read and comply with all safety and operating instructions,
and ensure all parts and correct quantities are included.
Any parts damaged during shipment must be reported within 5 days of receipt. To
report information regarding missing parts or damage, to purchase parts or acces-
sories, or if you have any questions, please contact us.
www.spectrumfurniture.com
800-235-1262, 715-723-6750
Thank you for purchasing Spectrum products!
Assembly Instructions
Tools
Required
0119509R1 Page 1 of 3
Assembly Instructions
Customized Logo Panel
for Media Manager Elite
and Director Lecterns
55199
(6) 041943
1/4-20 locknuts
(1) 0118612
Logo Panel
Media Manager Elite (55258) Installation:
1. Open the document camera drawer fully to access the knobs
securing the audience-side panel.
Figure 1A
.
2. While keeping a hand on the audience-side panel, unscrew the
(2) knobs inside the lectern behind the panel and remove.
3. Carefully lift the panel out.
Figure 1B
.
4. To replace the panel, insert the panel tabs into the slots in the
base panel, then tip the panel back into position. Replace knobs,
and tighten securely.
Open document
camera drawer
Knobs
Audience-side
panel
Slots in base panel
Figure 1A
Figure 1B
Drill with
3/8” drill bit
7/16” or
adjustable
wrench
CAUTION
While removing the knobs, be sure to fully-support the audience-
side panel to prevent it from falling out of the lectern.
