Flex Flip Tables
Assembly Instructions:
Tools Required:
Phillips screwdriver
Hex wrench (included with legs)
1/2" wrench
Before you begin, please make sure all parts and proper quantities are
included. Any parts damaged during shipment must be reported within
15 days of receipt. To report information regarding damages or if you
have any questions, please call 1-800-235-1262.
1. Attach Leg Mechanisms
A. Place worksurface face-down onto a non-abrasive surface.
B. Orient the leg mechanisms and release handle as shown and align with the
worksurface mounting holes.
Figure 1A
.
C. Attach the leg mechanisms and release handle to the worksurface using
(20) #14 x 7/8" PHSM screws and tighten securely.
D. Secure the cables to the worksurface with the included clips,
(4) #8 x 3/4" PHSM screws, and pre-drilled holes.
Figure 1B
.
To purchase parts or accessories, please contact us at
www.spectrumfurniture.com
1-800-235-1262
Thank you for choosing Spectrum products!
(20) 0101382
#14 x 7/8" PHSM Screws
24"D
#37310 - 48"W
#37312 - 60"W
#37314 - 72"W
30"D
#37311 - 48"W
#37313 - 60"W
#37315 - 72"W
0108517R2 Page 1 of 3
Figure 1A
Worksurface
Attach leg mechanisms to
worksurface with
#14 x 7/8" PHSM screws
Leg Mechanism
Cable Clip
Mounting
holes
Release handle
Leg Mechanism
Cables
Figure 1B
Secure cables with (4) PHSM
screws & cable clips (included
with table legs)
Cable
