Spectrum Illumination, Monster Brain Controller Manual
22
Rev. Date: 2013-11-27
Section 9 - Specifications
ELECTRICAL:
Input Voltage:
12-28VDC (LDM drivers require 23.5V min)
Input Current:
40mA typical @ 24V
Strobe Input Impedance:
10KΩ – PNP/ NPN input typical
PNP Trigger Input:
< 1 VDC for “OFF” >3 ≤ 30 VDC for “ON”
NPN Trigger Input:
GND for “ON” Open for “OFF”
Product ID input impedance (pins 1-7):
10KΩ typical
Product ID Input:
< 1 VDC for “Logic Low”
>3 ≤ 30 VDC for “Logic High”
Product ID output impedance (pin 8):
4.7KΩ typical
Camera Trigger output impedance:
2.7KΩ typical
0-10V Output Control:
0%= 0V, 100% = 10V
ENVIRONMENTAL:
Operating Temperature: 0 to 50°C
Relative Humidity:
5 to 85% non-condensing
MECHANICAL:
Connectors:
Connector with screw connection - 28-12 AWG wire
TIMING:
+------------------------------------------------- ...
|
| (Trigger)
----+
+-----------------+ +---- ...
| | |
(Strobes) | | |
----+------------+ +-------------+
^ ^ ^ ^
|<- tDelay ->|<- On Time ->|<-Off Time ->|
|
Trigger
Accuracy for all modes:
On Time/Off Time accuracy < 1 µsec
Channel Priorities:
Channel 1 is highest priority (most accurate)
Channel 4 is lowest priority
