2
en
SPI-LTOGYG
LeakTracker
™
OIL-GLO
®
ULTRA Complete
Fluorescent Leak Detection Kit
Directions
Kit Contents
For Use in Industrial Synthetic and Petroleum-Based Fluid Systems
Lamp Operation
z
To operate the SPI-LT UV LED Leak Detection Lamp:
Insert 3 AAA batteries (included). Press the button in the
end cap once to turn the lamp on. Press it again to turn
the lamp off.
z
To Replace Batteries:
Twist the end cap
counterclockwise to open. Remove the battery carousel.
Insert 3 AAA batteries and reinstall the carousel (positive
end toward the lamp head). Replace the end cap.
z
Warranty/Registration:
To review the warranty policy:
1. Add the appropriate OIL-GLO
®
ULTRA dye to the suspect
system. Begin with the recommended dilution ratios of dye
to host fluid. More dye can be added to the system if leaks
are not clearly visible.
2. Run the system to allow the OIL-GLO
®
ULTRA dye to
circulate thoroughly. The dye needs time to mix with the
oil and circulate to all the leak sites. This period of time
will vary greatly depending on the size of the system and
the size of the leak. It could take anywhere from 5 to 10
minutes for small systems with large leaks, to several days
for larger systems with smaller leaks.
3. Inspect all areas with a high intensity Spectroline
®
lamp.
Be sure to use the UV-absorbing protective glasses
supplied with the lamp. In hard to reach areas, use a
mirror to reflect the light, or wipe the obstructed area with
a clean cloth, and then check for the fluorescence.
NOTE:
For best results, use the lamp in low-light conditions.
4. OIL-GLO
®
ULTRA can safely remain in the system, so you
can check the repair without adding more dye.
5. After the leaks are repaired, clean the leak sites with
Spectroline
®
GLO-AWAY™ PLUS dye cleaner or a shop
cleaner. Check with the lamp to be sure all dye residue is
removed. Residual dye could give a false leak indication.
6. Run the system again and reinspect with the lamp. No
glow means all leaks have been fixed!
Quickly finds leaks in enclosed circulating systems containing fluids that are miscible with oil
(petroleum or synthetic-based), fuel, lubricant or similar fluids. For best leak detection results, use
OIL-GLO
®
ULTRA dye with a Spectroline
®
leak detection flashlight in low-light conditions.
READ CAUTIONS AND DIRECTIONS BEFORE USING.
FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY.
Part No.
Description
SPI-OGYG-8
Patented 8 oz (237 ml) twin-neck bottle of concentrated oil dye (glows yellow-green).
Treats up to 64 gallons (242 L) of fluid.
SPI-LT
LeakTracker™ UV LED, battery operated leak detection flashlight
RP-GA-2
2 oz (60 ml) spray bottle of GLO-AWAY™ PLUS dye cleaner
RP-UVS-30
Spectacles, UV-Absorbing
N/A
Dye treatment tags
WARNING
UV emitted from this product. Avoid eye and skin exposure to unshielded products. For professional examination use only.
z
Do not look directly into the light. Wear the UV-absorbing
protective glasses provided. Use in low-light conditions
to achieve the best inspection results.
z
Do not operate the lamp if it has been damaged.
z
The LeakTracker™ is not approved for use in hazardous
atmospheres. Do not attempt to use it in areas requiring
explosion-proof lighting.
z
Never use this equipment in any manner not specified
in these instructions because your protection may be
impaired.
Important Lamp Safety Instructions