manualshive.com logo in svg

SpectraPure The Eliminator RO System, Инструкция по установке и эксплуатации

Поделиться
Скачать
SpectraPure The Eliminator RO System Скачать руководство пользователя страница 6

SpectraPure

SpectraPure®Inc.

  

480.894.5437   Call us toll-free  1.800.685.2783    

2167 East Fifth St,    Tempe, Arizona   85281

®

6

Optional Accessories

AUTOMATIC SHUT-OFF FLOAT KIT (ASOFK) -  Provides an economical way to 
automatically fill open reservoirs. The ASO valve in conjunction with a check valve 
provides positive shut-off and completely shuts off the waste water and product 
water lines, thus conserving water

QUICK CONNECT FAUCET ADAPTER (FAU-SMP) - The Quick Connect Faucet 
Coupler with aerator, adapts kitchen and bathroom faucets to 1/4” tubing for 
easy disconnects. (use in place of the Garden Hose Adapter)

FEED WATER ADAPTER - Connects the  input line “BLACK” to  the tap  water line 
under the sink (use in place of the Garden Hose Adapter)

DRAIN SADDLE -  Connect the waste line “YELLOW” to a drain line.

TOTAL CHLORINE TEST KIT (TK-CL-5-KIT) - The Chlorine Test Kit contains 10 
tablets for ten tests. Test the waste water stream for chlorine break through of 
the carbon block filter.

FLUSH VALVE KIT (VA-FVK-4) - The Flush Valve Kit is placed between the 
membrane rejection port and the flow restrictor to provide a high flow by-pass 
used to purge concentrated brine from the membrane housing and rapidly flush 
any particulates from the membrane surface. 

TOTAL DISSOLVED SOLID METER (MTR-TDS-4TM-0-9990) - Measure the TDS 
levels or temperature of the water. Perfect for both consumer or commercial use 
in fresh water or salt water.

SpectraPure®Inc

. assumes no responsibility for water 

damage due to leaks. It is the user’s responsibility to 

determine that the system is leak-free.

Содержание The Eliminator RO System





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды