SpectraPure
®
SpectraPure
®
Inc.
480.894.5437 Call us toll-free 1.800.685.2783
2167 East Fifth St, Tempe, Arizona 85281
12
INSTALL THE FLOAT VALVE:
1. Drill a 1/2" hole near the top of your reservoir:
NOTE: If you are installing the Float Valve onto an acrylic tank we
recommend using a new Fostner Bit to reduce the chance of
cracking the acrylic.
2. (Refer to Diagram on next page) Remove the Compression Nut from
the float body.
3. Insert the 1/4" Blue Tubing into the 1/2" Compression Nut with the
threads towards the end of the tube.
4. Unscrew and remove the remaining nut from the float body.
5. Insert the float body and washer into the 1/2" hole and tighten the
nut, which securely tightens the float to the tank wall.
6. Push the Compression Nut towards the end of the tubing and screw
the Compression Nut back onto the float body.
7. To tighten, use one 1/2" wrench on the flats of the plastic threads and
another 1/2" wrench on the Compression Nut.
16. Upon startup, air may be trapped in the DI cartridge (housing may not
appear full), this is a normal condition and it will not affect the operation
of the DI section. However, when you later install the Float Valve for
automatic operation, all air must be kept purged from the housing by slightly
unscrewing the housing and letting the running water displace the air until
the housing is full of water. Hand tighten housing once air has been purged.
17. Set the meter to “Line 3” and run the system until the meter reads zero. The
water is now ready to use.
You can set the meter to monitor either of the
3 probes at any time
.
18. Close the cold water supply valve.
19. Finish the installation by directing or connecting the yellow line to a
permanent drain.
20. Install the included Float Valve onto a collection reservoir. See below.
21. Attach the blue line to the Float Valve.
22. (For - AF Systems) Connect the supplied power supply to the black 2.1 mm
Mini Plug. (See page 9)
NOTE: It may take several days of normal operation for the membrane to
reach its full production rate.
