background image

 

 

2.3  Baud Rate 

The computer must be set to the Digikröm CM110/112 data type and baud rate 

Character length: 8 bits 
Baud rate: 

9600 bits/sec 

Stop bits: 

Parity:  

None 

The Digikröm CM110/112 is factory configured and the character length, number of stop bits and parity cannot be changed.  
Its signal levels and format are the same as those that are specified for the RS-232.  The CM110/112 emulates data 
communications equipment (DCE). 
 
 

2.3  Attaching a Detector 

 
Attach a detector to the monochromator using the bayonet mounting flange (

See Appendix L

).  In order to maintain a tight 

optical seal between the monochromator and the detector, it may be useful to allow the detector’s mounting flange to protrude 
slightly into the hole in the slit plate.  A rubber or foam gasket between flat surfaces is also frequently used. 

2.4  Product Specifications 

 

 

Wavelength Drive:

   Anti-backlash worm and wheel with microprocessor control.  Bi-directional.  Usable in positive or 

negative grating orders. 

 

Beam Path:

 Either right angle or straight through(standard configuration) from source 

 

Design

:  Czerny-Turner, dual-grating turret 

 

Focal

 Length:  110 mm 

 

F/#:

   3.9 

 

Gratings:

 30 x 30 mm.  See the Standard Grating Table in Appendix B. 

 

Wavelength Precision

:  

>0.2 nm with 1200 g/mm grating 

 

Wavelength Accuracy: 

+ 0.2 nm with 1200 g/mm grating 

 

Slewing Speed: 

 

>100 nm/second with 1200 g/mm grating 

 

Maximum Resolution: 

0.2 nm with 1200 g/mm grating 

 

Band pass:

   

 

1 nm with .150mm slit and 1200 g/mm grating 

 

Standard Slits (mm):

 0.125, 0.15, 0.3, 0.6, 1.2, and 2.4.  For other values, consult Spectral Products. 

 

Software:

  Demo control program with source is included.  A LabVIEW

®

 

 Driver  is available upon request. 

 

Power:

 UL listed 110/220 V power pack, meets or exceeds UL1950, CSA 1402C, and IEC 950. 

 

Interface:

 RS-232 standard 

 

Warranty:

 One year from delivery date 

 

CE

 marked 

 

Options

: Hand-held control module for local control, IEEE-488 interface, Interface cables, GPIB to RS232 converter, 

Gold optics for IR range.

 

Spectral Products

 

 

                2659-A Pan American Frwy., NE  Albuquerque, NM 87107   Tel (505) 343-9700    Fax (505) 343-9705 

www.spectralproducts.com 

6

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание Digikrom CM110









































Отзывы: