14
The red overload indicator input LED will illuminate whenever excessive input or output signal level
overload, (+22 dBu), occurs.
In some applications it is particularly desirable to utilize the output overload indicator LED as a guide to
obtaining additional limiting with the output of the Model V610.
Dimensions and Mounting
The Model V610 is designed to fit a standard 19 inch electronics equipment rack, cabinet or console, and
requires 5 ¼” inches of vertical rack space. The unit may be mounted in any position. The 4 oval cutouts
on the ends of the front panel are provided for mounting. The front panel is 1/8” x 3 1/2” x 19”. Behind
the front panel, the unit is 5 ¼” high, 17” wide and 8 1/2” deep. The net weight is 10 pounds. The unit is
completely self contained and does not require forced air cooling.
Design Schematics and
Physical Layout
The Model V610 Block Schematic Design is shown in Figure 5.
The Model 101 Audio Amplifier, Model 601 Compressor/Limiter and Model 603A Gain Reduction
Meter Amplifier modules must be repaired only by the factory due to the precise and critical
parameter requirements of the components utilized. Arbitrary insertion of standard components
cause catastrophic failure of the plug-in modules and should not be attempted. It is for this reason
that the plug-in module schematics are not provided.
Please contact the factory for additional service information and schematics on non critical components.
EQUIPMENT WARRANTY
The following warranty is effective for all Spectra Sonics, LLC (Manufacturer) products. Spectra Sonics warrants that this
product is free of defects in both materials and workmanship. Should any part of this product be defective, the Manufacturer
agrees at its option, to:
A. Repair or replace with a like new replacement any defective part free of charge (except transportation charges) for a period
of one year for all products. This warranty period begins on the date the end user is invoiced for the product, provided the end
user provides proof of purchase that demonstrates that the product is still within the warranty period and returns the product
within the warranty period to Spectra Sonics, LLC, according to the Product Return and Repair Policy set forth below. All
inbound shipping costs are the responsibility of the end user; Spectra Sonics, LLC will cover all outbound shipping costs.
Product Return and Repair Policy
Return to Manufacturer
1. An RMA (return merchandise authorization) number must be obtained by the end user from Spectra Sonics, LLC.
2. The user must return the product to Spectra Sonics, LLC with proof of purchase (showing purchase date) for a
warranty claim, and display the RMA number on the outside of the shipping package.
THIS WARRANTY IS VOID IF:
•
The product has been damaged by negligence, accident, act of God, or mishandling, or has not been operated in
accordance with the procedures described in the operating and technical instructions, or
•
The product has been altered or repaired by other than the Manufacturer or an authorized service representative of
the Manufacturer; or
