Spectra FW V1.6, Руководство пользователя

Страница: 7 / 12

Spektra S.r.l Spektra S.r.l Spektra S.r.l Spektra S.r.l....
-
via Pavia 29, 21052 Busto Arsizio (VA) – ITAL ITAL ITAL ITALY Y Y Y ---- www.spektra www.spektra www.spektra www.spektra----srl.it srl.it srl.it srl.it spektra@email.it spektra@email.it spektra@email.it spektra@email.it
7
PROGRAMMING GENERAL PARAMETERS
PROGRAMMING GENERAL PARAMETERS PROGRAMMING GENERAL PARAMETERS
PROGRAMMING GENERAL PARAMETERS
##NNAMExxxx* setting the unique name of the tracker device
xxxx = vehicle name (maximum 10 characters)
xxxx = VEICOLO1 - (DEFAULT)
##MOVx enable the shock sensor and set the motion sensivity
x = 0->9
x = 0 function disable (DEFAULT)
x = 1 low sensivity, a long and durable movment is necessary to trigger the
unit.
x = 9 high sensivity, a little movment is enough to trigger the unit.
##F0
GPS receiver in normal operation, the module is switched on during the vehicle
movement and switched off about one minute after the vehicle stops - (DEFAULT)
##F1 GPS receiver always forced to on (only recommended for internal installations)
##LEDx
status LED on board on/off
x = 0 LED always off
x = 1 LED normal operation with various diagnostic flashing - (DEFAULT)
##Ixx the tracker device continues to store for the time requested, even if there is no
movement. This command allows the user to modify this value based on their
requirements.
xx = 01->99 minutes
xx = 05 minutes - (DEFAULT)
##TMxxxxx the tracker device stores a GPS point every xxxxx seconds. This command allows
the user to modify this value to adapt it to their requirements.
xxxxx = 00002->65530 seconds
xxxxx = 00005 - (DEFAULT)
##FORMAT clears all user programming and resets the tracker device to the original factory
settings (an immediate hardware reset of the entire tracker device is also
generated)
##RESET the immediate restart of the entire tracker device is forced without modifying the
set configurations
##CLEAR-TCP reset the buffer of the memory-points TCP
##CLEAR-SMS reset the buffer of the memory-points SMS
##CLEAR-ALL reset the buffers of the memory-points SMS and TCP
##DL-TCP force the download of the buffer memory TCP and wakeup the device
##DL-SMS force the download of the buffer memory SMS and wakeup the device
##WAKEUP activates the tracker device by simulating a physical movement.