14
When they have engaged, the assembly will come to rest on the first O-ring as shown below
(See Figure 17).
The assembly is completed by firmly pressing down on the Rear Panel handles until it is fully
inserted into the enclosure, and then engaging the four Draw Latches. Be certain to keep the
rear panel parallel to the rear surface of the enclosure as it is being inserted.
When installing the Rear Panel, check that no objects are lying across the seal area. Also
verify that the seals are properly placed in the O-ring grooves, with nothing under them,
and confirm that they are not pinched when pulling the latches down. Make certain that
the seal lines, seen as two dark stripes where the O-rings contact the clear acrylic, are
visible and continuous.
Figure 17 Rear Panel Inserted Into Enclosure
