Spectra Precision Focus 30, Руководство пользователя

Страница: 39 / 126

Spectra Precision FOCUS 30 User Guide 23
3 Getting Started
Touch Screen
The CU LCD screen in Face1 can be viewed easily both in direct sunlight and in over-
cast conditions. It also incorporates a touch interface for navigation. Tap elements on
the screen with a stylus or your finger.
Calibrating the Touch Screen
If the touch screen does not respond properly when you tap it, recalibrate it as fol-
lows:
1. Tap the Start menu and select Settings/Control Panel/Stylus. The Stylus
Properties appears.
2. To recalibrate, tap Recalibrate in the Calibration tab.
3. Follow the prompts on the screen.
Disabling the Touch Screen
To clean the touch screen during a survey, press
T
+
B
[
S
] to disable it. To enable
the touch screen again, press
T
+
B
.
Display Backlight Face1 Control Unit
The display light is active by default and can be toggled on/off by pressing
T
+
A
[
C
]. To change backlight brightness and save battery life
1. Tap the Start menu and then select Settings/ Control Panel/ Display Properties/
Backlight.
2. Adjust Backlight brightness and select when the instrument has to turn off the
backlight automatically.
3. Tap OK.
Note –
Settings for display light Face2 and reticle illumination see Settings Face2
Display Backlight, Reticle Illumination and Tracklight, page 42 .
Settings Time and Date
1. Tap the
Start menu
and then select
Settings/Control Panel/Date/Time
.
2. Change the date and time as required.
3. To accept the new settings, tap OK . To cancel, tap
B
.
Note –
when you attach the instrument to your computer using Microsoft
®
ActiveSync
®
technology, time and date are automatically updated.