Spectra Geospatial Focus 35, Руководство пользователя

Страница: 23 / 109

3 Getting Started
Battery Disposal
Before disposal, discharge the battery.
Dispose of the used battery in an environmentally sensitive manner, according to local and national
regulations, see also
Environmental Information .
Checking the Instrument Battery Power Supply
To check the power supply in the FOCUS 35 Total Station battery using the built-in battery gauge, press
the button on the side of the battery:
When you press the button, four LEDs on the battery show the power level. Each LED corresponds to a
power level of 25% so that when the power level is at 100%, all four LEDs are lit. If the battery is
completely discharged, all LEDs are unlit.
When the button is pushed and all the LEDs flash, the battery needs to be reconditioned in the battery
charger.
When the battery capacity is between 0 and 10% one LED is flashing. A battery that has a flashing LED
might not be able to start the instrument. If started, with a battery that has a flashing LED, the operating
time will be between 5 and 15 minutes.
Charging the Instrument Batteries
The batteries are supplied partially charged. Charge the batteries completely before using it for the first
time.
l
To charge the batteries, use only the charger that is recommended by Spectra Geospatial for
charging the lithium-ion battery. The charger can charge instrument and radio batteries. It can be
powered by mains power or from a car battery (socket / cigarette lighter adaptor). The charger can
be used either in car or office.
l
Before charging the batteries please read the charger instruction information that was provided
with the charger package.
FOCUS 35 Total Station User Guide | 23