Spector&Co T1016, Инструкция по эксплуатации

Страница: 2 / 10

2
T1016 Summit Product Map
Operation
1. To turn on the T1016 Summit, first press the button at the top (center) of the unit
– the speaker will elongate
(hydraulic function) & will automatically be ready for Bluetooth pairing
2. To turn off the speaker, push on both sides of the speaker to until it locks back into place
Bluetooth Mode
1. Pairing the T1016 Summit with your audio device
a. A blue LED light will flash to indicate the T1016 is ready for pairing
b. Activate Bluetooth on your audio device & select the Spector T1016 signal (no paring password required)
c. Once paired, white LED light will remain lit
NOTE: If your Bluetooth enabled audio device has paired with the speaker successfully once before, the two devices
will re-connect automatically when they are turned on & within range.
2. Operation in Bluetooth mode
a. Next song
b. Volume increase
c. Previous song
d. Volume decrease
e. Play/Pause Answer/End
* Press & hold 2 seconds to reject incoming calls
* Once connected, press & hold for 2 seconds to transfer call from speaker unit to connected device
NOTE: After a call is terminated, the T1016 will resume to previous working status.
AUX mode
1. Connect 3.5 mm audio jack cable to the T1016 & to your audio device NOTE: blue LED light will continue to
flash when in AUX mode
2. Play/Pause/Answer Call/End Call/Skip songs: all functions must be controlled directly on your audio device
3. Volume control: can be controlled on the speaker or directly on your audio device
NOTE: After a call is terminated, the T1016 will resume to previous working status.