1.
To activate AUX mode, turn speaker ON
2.
Plug in 3.5mm AUX audio cable into your audio device & insert the micro-USB cable into the
T234
3.
Play/Pause/skipping songs/volume control & answer/end incoming calls can be controlled on the
T234 and/or directly on your audio device
TF Card Mode
1.
Insert your TF card & music will automatically begin playing
2.
Play/Pause: press quickly on the multi-function button
3.
Volume control: swipe & hold multi-function buttons to the left or right
4.
Quickly swipe the multi-function button left to play previous song or right to skip song
5.
Press on card to eject
LED Light Display
The LED light display functions in accordance with the volume of the speaker. The higher the volume, the
more LED colors displayed.
Volume
Lights on Speaker
Low
Blue
Medium
Blue, Red
High
Blue, Red, Green
To Charge the T234
1.
Insert micro USB into the
T234
& connect the USB output to a wall adapter (not included)
2.
Small red LED (located near the micro-USB port) indicates the device is charging (red LED will
turn OFF once fully charged)
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
