T234 Product Map
T234 Operation
1.
On: turn ON/OFF switch to ON
2.
Once T234 has been turned ON, it is automatically in WIRELESS mode
3.
Press M button ONCE to switch from Wireless to FM radio mode
4.
Insert TF card reader OR input audio cable to switch to TF or AUX mode
5.
Off: turn ON/OFF switch to OFF
Wireless Pairing
1.
Once T234 has been turned on, it is automatically in WIRELESS mode (LED lights will flash to
indicate the speaker is ready for Wireless pairing)
2.
Enable Bluetooth function on your electronic device.
3.
Search Bluetooth signal
Spector T234
& pair
your device (an audio prompt will indicate
successful pairing)
NOTE: previously paired devices will automatically re-connect to the T234 speaker when both devices are
turned on & within range.
Wireless Mode
Use multi-function button (button 1 in product map) for all functions below:
a.
Press down quickly to play/pause & answer/end incoming calls
b.
Swipe right to skip to next song
c.
Swipe right & hold to increase the volume
d.
Swipe left to skip to previous song
e.
Swipe left & hold to decrease the volume
NOTE: the microphone is built-in to the speaker between the TF card slot and the multi-colored LED
window.
FM Radio mode
NOTE: Plug in the micro-USB/USB cable while in FM radio mode. The cable will act as an antenna and
will improve the radio signal.
1.
To activate FM radio, turn speaker ON & quickly & hold the M button. When static noise can be
heard, FM mode has been successfully activated.
2.
Press the M button quickly to initiate the scan of all accessible FM radio stations (it can take up to
a minute to scan & identify all available stations)
3.
Once initial scan is complete, quickly swipe left or right to switch radio stations
4.
Press & hold the M button to switch back to Wireless Mode or AUX mode
Aux Mode
No.
Description
1
Multi-Function button
2
Micro-USB port
3
Charging indicator
4
USB port
5
ON/OFF button
6
TF Card slot
1
2
3
4
5
6
