charging adapter. Some electronic devices with integrated wireless capability may require users to
manually enable wireless charging in the settings of their electronic devices ***
1.
Insert the USB Type-C input of charging cable (included) into T145 (see #1 in Product Map)
&
connect the output of the cable (USB Type-C) to a certified wall adapter (not included).
2.
One flashing Red LED indicates that the
T145
is ready for wireless charging.
3.
Center your smartphone over the wireless charging area (see #4 in Product Map). A solid red
LED indicates the
T145
is wirelessly charging your smartphone
(NOTE: the solid red LED will remain lit on the
T145
to indicate your smartphone is 100% fully
charged)
4.
To stop charging, remove your smartphone device from the
T145
and disconnect the charging
cable
NOTES:
-
Wireless charging distance between smartphone &
T145
wireless charging dock must be within
6mm
-
Only smartphones equipped with wireless charging capability can use the wireless charging of the
T145
-
The wireless charging dock of
T145
will activate only when it is connected to a certified A/C adapter
(not included)
-
T145 is not equipped to recharge a smart watch
CAUTION:
Risk of Fire and Burns, don’t open, crush, disassemble and dispose of in fire. Accessible surfaces held
or touched for short pe
riods only. Don’t heat above 50°C or Incinerate. Follow Manufacturer’s Instructions
FCC STATEMENT
This device complies with Part 18 of the FCC Rules.
•
The interference potential of the device or system.
•
Maintenance of the system.
•
Simple measures that can be taken by the user to correct interference.
•
For RF lighting devices, provide an advisory statement, either on the product packaging or with other
user documentation, similar to the following:
This product may cause interference to radio equipment and should not be installed near maritime
safety communications equipment or other critical navigation or communication equipment operating
between 0.45-30 MHz.
Made in China
