background image

 

 

 

 
IMPORTANT SAFEGUARDS 

 
1. READ INSTRUCTIONS 

All the safety and operating instructions should be read before the unit is operated. 

2. RETAIN INSTRUCTIONS 

The safety and operating instructions should be retained for future reference. 

3. HEED WARNINGS 

All warnings on the unit and in the operating instructions should be adhered to. 

4. FOLLOW INSTRUCTIONS 

All operating and usage instructions should be followed. 

5. CLEANING 

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Clean only with a dry cloth. 

6. ATTACHMENTS 

The manufacturer of this unit does not make any recommendations for attachments, as they may cause hazards. 

7. WATER AND MOISTURE 

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a 
swimming pool. 

8. ACCESSORIES 

Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious 
damage to the unit. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven 
surfaces may cause the appliance and cart combination to overturn.

 

9. VENTILATION 

Slots and openings at the rear cabinet and bottom are provided for ventilation, these are to ensure reliable operation of the unit, 
and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by 
placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat 
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or 
the manufacturer’s instructions have been adhered to. 

10. POWER SOURCE 

This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of 
power supply to your home, consult your appliance dealer or local power company. 

11. POWER-CORD PROTECTION 

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, 
paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 

12. LIGHTNING 

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the 
wall  outlet  and  disconnect  the  antenna  or  cable  system.  This  will  prevent  damage  to  the unit  due  to lightning  and  power  line 
surges. 

13. POWER LINES 

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or 
where it can fall onto or against such power lines or circuits. When installing an outside antenna system, extreme care should be 
taken to keep from touching such power lines or circuits, as contact with them might be fatal. 

14. OVERLOADING 

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock. 

15. OBJECT AND LIQUID ENTRY 

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could 
result in fire or electric shock. Never spill or spray any type of liquid into the unit.

 

16. HEAT 

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including 
amplifiers) that produce heat.

 

17. CONNECTING 

When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure 
to do so may cause a product damage. Read the owner's manual of the other equipment carefully and follow the instructions 
when making any connections.

 

18. LCD 

Do not press on or jolt the LCD panel. Doing so may cause the LCD panel glass to break and injury may occur. Should the LCD 
panel be broken and liquid leaks out, do not inhale or swallow it. Doing so may cause poisoning. If you have got it into your 
mouth, wash it out and consult your doctor. If your hands or clothes have touched it, wipe them with alcohol and a cleaning cloth 
and then wash them well.

 

Important Information 

 

Содержание VM8RM2LCD

















Отзывы: