Speco Technologies® 0106 SG-WR150
3
Speco Technologies Weatherproof Ruggedized Keypad Instruction Manual SG-WR150
SG-WR150 Specifications:
Speco Technologies weatherproof ruggedized keypad (SG-WR150)
is designed to meet most
residential, commercial and industrial single door access control requirements. The electronics
reside in this self-contained unit. The SG-WR150 is a weatherproof indoor/outdoor surface mount
device. This rugged keypad comes with its own tamper resistant box.
•
Power :
AC or DC, from nominal 12V to 24V
•
Acceptable voltage variation
:
12
V DC to 28V DC max.
10V AC to 27V AC max.
•
Power Consumption:
-At 12V DC
Less than 180mW in standby
Less than 650mW max. in operation
- At 24V DC
Less than 530mW in standby
Less than 1.6W max. in operation
- At 12V AC
Less than 385mW in standby
Less than 1.3W max. in operation
- At 24V AC
Less than 1.3W in standby
Less than 3.1W max. in operation
Operating Temperature:
-13° F to +130° F (-25°C to +55°C)
Dimensions:
4-3/4”H x 4”W x 2”D (at top of housing)
Warranty:
1 Year
Rank & Code
Each user has a rank and code which allows the System Administrator to keep track of the
system without knowing personal codes. Access can be allowed or denied by rank, even if a code
is not known.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/ TV technician for help.
Other Speco Technologies Single Door Access Control Products
SG-100
Stainless Steel Indoor Keypad
SG-WM200
Weatherproof Mullion Backlit Keypad
SG-W300
Weatherproof Architectural Backlit Keypad
Speco Technologies
200 New Highway
Amityville, NY 11701
800-645-5516
631-957-8700
Fax: 631-957-9142 or 631-957-3880
www.specotech.com
®
070106
SG-WR150 Relay Diagram