O
O
I
I
N
N
T
T
5
5
6
6
B
B
O
O
w
w
n
n
e
e
r
r
’
’
s
s
M
M
a
a
n
n
u
u
a
a
l
l
Rev.1.2 (April, 2012)
48
☞
NOTE
■
When the CAM TITLE menu is
‘
OFF
’
, no title will be displayed on the monitor screen even if you enter one.
■
Only English is available in this mode.
■
If you move the cursor to CLR and press the Function Setup switch, all the letters are deleted. To edit a
letter, change the cursor to the bottom left arrow and press the Function Setup switch. Move the cursor over the
letter to be edited, move the cursor to the letter to be inserted and then press the Function Setup switch.
◆
SYNC: In areas where the supply is at 60Hz(NTSC), 50Hz(PAL), you can synchronize the output
phase of multiple cameras using the power synchronization function (Line-Lock) without using a
synchronization signal generator.
- INT: Internal Synchronization Type
- L/L: Power Synchronization Type, Line-lock
* Press the Function Setup switch.
* You can select a desired phase from 0 to 359 when select 'phase'.
☞
NOTE
■
When using AC power at 60Hz(NTSC), 50Hz(PAL), frequency, you can use the L/L type synchronization.
■
When the power is DC 12V, the SYNC menu is fixed to the
‘
INT
’
mode.
◆
MOTION DET: This product has a feature that allows you to observe movement of objects in 8
different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when
movement is detected. Activity can be monitor more efficiently.
1) When the SPECIAL menu screen is displayed, press the Function Setup switch so that the arrow
