29
At the CLOCK menu, move the cursor to the TIME ADJUST using the
▲,▼
buttons.
Press the ENTER button when the cursor is on the TIME ADJUST.
Select “ON” or “OFF” using the
buttons when the cursor is on “INTERNET TIME ADJUST”. If the
INTERNET TIME ADJUST is “ON”, the time of DVR will be adjusted to the time offered by an NTP
server.
Move the cursor using the
▲,▼
buttons and then set the IP address of SELECT TIME SERVER using the
buttons .
Set the correct TIME ZONE standard to your GMT.
Move the cursor to the DAYLIGHT SAVING TIME using the
buttons. Select “ON” or “OFF”
using the
button
If the DAYLIGHT SAVING TIME set “ON”, set up the starting date and time and ending date and time. Use
the
▲,▼
buttons to move the cursor and use the (-), (+) buttons to change the value.
To exit this TIME ADJUST menu, press the ESC button.
4.5.2
VIDEO STANDARD
5.5.3 VIDEO STANDARD
4.5.3
Video Standard
At the SYSTEM menu, move the cursor to the VIDEO STANDARD using the
▲,▼
buttons.
You can select either NTSC or PAL using the
button.
Press the ESC button to exit from VIDEO STANDARD menu.
4.5.4
Language
At the SYSTEM menu, move the cursor to the LANGUAGE using the
▲,▼
buttons.
Select the desired language using the
buttons.
4.5.5
Advanced Setup
At the SYSTEM SETUP menu, move the cursor to the ADVANCED SETUP using the
▲,▼
buttons.
Press the ENTER button when the cursor is on the ADVANCED SETUP and the following screen appears.
Manual setup
:
This DVR can recognize the correct time by itself. That is to say, if you input the correct time 3 or 4 times,
the DVR will recognize the clock error and display the correct time by itself.
When you power on, you can see the TIME TRIMMING VALUE screen and modify time correctly on this
screen with AUTO button and ALARM RESET button.
If you select “AUTO”, this DVR can detect NTSC/PAL automatically.
