Frequency Response
Input Level
Normal
+4 dBu
Maximum
+28dbu
Output Distortion(THD+n)
22Hz to 22KHz @ +4dBu
.0016%
T est Conditions:
AP ba4dBu signal connected to input.
All Boost/Cut controls set to “0”
LP and HP filters enable switches set “out”
4 Band EQ enable switch set “in”
AP analyzer connected at output
Residual Noise Measurement
T est Conditions:
AP balanced signal connected to input.
AP Generator set “Off”
All Boost/Cut controls set to “0”
AP analyzer connected at output
Power requirements
9 Watts
Dimensions
HxWxD = 8.6" x 1.75" x 11"
(218mm x 44mm x 280mm)
Shipping weight
Approximately 7 lbs (3.2Kg)
ALL MEASUREMENTS WERE PERFORMED WITH AN AUDIO PRECISION TEST SET .
Output Level:
(Active Balanced)
(Transformer Balanced)
Normal
+4 dBu
+4 dBu
Maximum
+28dbu
+24dBu
Input Impedance
30K Ohms
Output Impedance
(Active Balanced)
(Transformer Balanced)
60 Ohms
600 Ohms
Measured at active balanced output
Measured at transformer output
5Hz(-0.25dB) to 68kHz(-0.5dB)
2Hz(-.25dB) to 149kHz(-3dB)
10Hz(-0.25dB) to 68kHz(-0.5dB)
10Hz(-.25dB) to 148kHz(-3dB)
Residual Noise Measurement
(10Hz-80kHz)
-89 dBu
Specifications
(Active Balanced)
(Transformer Balanced)
.0025%
Shelf switches set “out”
LP filter, HP filters, and Equalizer enable switches set “in”
Shelf switches set “out”
Transformer - Active output switch set “out”
Chapter 1
Introduction Section
3
