7
Operation
05/2013 VG
766.2330.061
EN
53
7 Operation
7.1
Operating the overhang counter swim unit
7.1.1
Turning the unit ON and OFF
Switching the unit ON and OFF is done by pressing the pneumatic
push button built into the housing. See page 65, figure 10.
7.1.2
Air Regulation Function
The air regulator enables the intake of air via the nozzle in order to
achieve a bubbling bath effect. See page 65, figure 10.
7.1.3 Light
operation
Turning the light ON and OFF is done by pressing the pneumatic
button built into the housing. See page 65, figure 10.
7.1.4
Setting the ball nozzle
The direction of the ball nozzle is adjustable. The nozzle is normally
set in a horizontal or slightly upwards position which then provides
the optimal effect for counter swimming.
Ensure the ball nozzle is fully opened by turning it anti-clockwise
before start- up.
7.1.5 Cover
damage.
. The cover is not designed to withstand excessive weight and
should not be stood on or used as a diving board or starting block.
7.1.6 Optimal
water
level
If there is insufficient water in the pool, the unit will not function
properly.
Check that the level of water in the swimming pool is sufficient. See
page 66 figure 13 and observe the markings on the unit.
