Specialized TURBO GRAVEL, Инструкция по сборке

Страница: 8 / 22

7
25
26
27 28
29
30 31
25. Lift the fork out of the packaging and remove the
protective brace.
26. Remove the front brake pad spacer from the caliper.
CAUTION: Do not pull the brake lever with
the wheel removed and without a brake
pad spacer installed.
27. (BOTA) Using the corresponding hex key, remove
the thru-axle from the fork.
28. (FLTA) Rotate the lever on the thru-axle to loosen it
and remove it from the fork.
29. Install the front wheel into the fork ensuring the
brake disc is between the brake pads in the caliper.
30. (BOTA & FLTA) Lightly grease the shaft of the thru-
axle and slide it through the fork from the left (non-
drive) side of the bicycle.
CAUTION: Do not grease the threads on
the thru-axle.
31. (BOTA)
Using a torque wrench and corresponding
hex bit, tighten the thru-axle (clockwise) to the
specified torque setting found on the axle and/or in
the user manual.