Specialized Stumpjumper FSR, Руководство пользователя, Страница: 9 / 28

6
WARNING! While the 29 frame is generally compatible with tires up to 27.5 x 3.0 or 29 x 2.6
and the 27.5 frame with tires up to 27.5 x 3.0, tire dimensions can vary depending on the
manufacturer, and not all forks are designed to accept a larger tire. Always check with the fork
manufacturer regarding required clearances.
4.3. TOOLS REQUIRED
„
1.5, 2.5, 3, 4, 5, 6mm Allen keys
„
High pressure shock pump
„
Cable and housing cutters
„
T10, T25 Torx keys
„
High-quality grease
„
Cutting blade (for Nylon tubes)
„
Torque wrench
„
Blue threadlocker (Loctite 242)
„
Protective strip (tube cutting)
4.4. BOLT SIZE / TOOLS / TORQUE SPECIFICATIONS
WARNING! Correct tightening force on fasteners (nuts, bolts, screws) on your bicycle is important
for your safety. If too little force is applied, the fastener may not hold securely. If too much force is
applied, the fastener can strip threads, stretch, deform or break. Either way, incorrect tightening
force can result in component failure, which can cause you to lose control and fall.
Where indicated, ensure that each bolt is torqued to specification. After your first ride, and
consistently thereafter, recheck the tightness of each bolt to ensure secure attachment of the
components. The following is a summary of torque specifications in this manual:
GENERAL TORQUE SPECS:
LOCATION TOOL TORQUE (in-lbf) TORQUE (Nm)
SEAT COLLAR 4mm HEX 55 6.2
WATER BOTTLE BOSS 3mm HEX 25 2.8
12MM REAR AXLE 6mm HEX 133 15.0
DERAILLEUR HANGER 2.5mm HEX 7 0.8
HOUSING GUIDES / BB PORT 3mm HEX 7 0.8
CHAINSTAY PROTECTOR T25 TORX 7 0.8
DOWN TUBE PROTECTOR T25 / 3mm 7 0.8
SWAT LATCH T10 TORX 6 3 0.7 3
ISCG TABS (max 7 threads depth) 4mm HEX 55 6.2
HOUSING TUBE SET SCREW 1.5mm HEX N/A N/A
CAUTION (non-pivot bolts): Ensure all contact surfaces are clean and greased.
3
CAUTION: Tighten SWAT latch screws intermittently until there is no more wiggling of the latch or
pipeline, then turn each screw another
¼
turn.
PIVOT TORQUE SPECS (Torque the pivot bolts in the order listed below, after the assembly is complete):
LOCATION ALLEN KEY TORQUE (in-lbf)
TORQUE (Nm)
MAIN (BOTTOM BRACKET) 4 6 210 23.7
LINK @ SEAT TUBE
6 180 20.3
LINK @ SEATSTAY
6 180 20.3
DROPOUT (HORST LINK)
6 180 20.3
LINK @ EXTENSION 6 180 20.3
UPPER SHOCK EYE
5 90 10.2
LOWER SHOCK EYE
6 210 23.7