Specialized Stumpjumper FSR, Руководство пользователя, Страница: 23 / 28

20
7. SWAT BIKE EQUIPMENT
Stumpjumper FSR frames are compatible with certain SWAT (Storage, Water, Air, Tools) components. SWAT
components are listed below:
7.1. SWAT CC
„
The
SWAT CC (Conceal Carry) tool includes the
top cap, chain tool and custom EMT mini tool that fits inside
the steerer tube. Refer to the SWAT CC User Manual for assembly instructions.
7.2. EMT TOOL
„
The EMT Mini Tool is a custom EMT mini tool that fits in the Zee Cage II Cage-Mount Tool Cradle (fig.1).
CAGE-MOUNT
TOOL CRADLE
1 2
„
Install the metal bracket into the Cage-Mount Tool cradle (the round hole goes into the cradle, the oblong hole
aligns with the Z Cage’s lower frame mounting hole).
„
Align the hole at the base of the Z Cage II over the hole in the Cage-Mount Tool cradle.
„
Insert the T-Nut into the Frame Tool cradle from below.
„
Thread the T-Bolt into the T-Nut. Torque the T-Bolt to 15 in-lbf (1.7 Nm).
„
Install the EMT tool into the cradle.
The EMT Tool with Cage-Mount Tool cradle and Z Cage II can be installed on many bike models.
Some frames are not compatible due to interference between the frame and the Cage-Mount Tool
cradle. Verify proper fit before installation.
The Z Cage II is available in left- or right-side bottle entry options.
7.3. SWAT DOWN TUBE STORAGE
„
The SWAT Down Tube Storage is a pair of soft wraps designed to contain a tube, pump and two CO2 cartridges.
The wraps fit inside the down tube, through an access port at the base of the down tube to store essentials
(Carbon models only).