Specialized Enduro Comp, Руководство пользователя

Страница: 7 / 28

4
„
While riding, listen for any creaks, as a creak can be a sign of a problem with one or more
components. Periodically examine all surfaces in bright sunlight to check for any small
hairline cracks or fatigue at stress points, such as welds, seams, holes, and points of
contact with other parts. If you hear any creaks, see signs of excessive wear, discover any
cracks, no matter how small, or any damage to the bicycle, immediately stop riding the
bicycle and have it inspected by your Authorized Specialized Retailer.
„
Lifespan and the type and frequency of maintenance depends on many factors, such as
use, rider weight, riding conditions and/or impacts. Exposure to harsh elements, especially
salty air (such as riding near the ocean or in the winter), can result in galvanic corrosion of
components such as the crank spindle and bolts, which can accelerate wear and shorten
the lifespan. Dirt can also accelerate wear of surfaces and bearings. The surfaces of the
bicycle should be cleaned before each ride. The bicycle should also be maintained regularly
by an Authorized Specialized Retailer, which means it should be cleaned, inspected for
signs of corrosion and/or cracks and lubricated. If you notice any signs of corrosion or
cracking on the frame or any component, the affected item must be replaced.
„
Regularly clean and lubricate the drivetrain according to the drivetrain manufacturer’s
instructions.
„
Do not use a high pressure water spray directly on the bearings. Even water from a garden
hose can penetrate bearing seals and crank interfaces, increasing bearing and crank wear.
Use a clean, damp cloth and bicycle cleaning agents for cleaning.
„
Do not expose the bicycle to prolonged direct sunlight or excessive heat, such as inside a
car parked in the sun or near a heat source such as a radiator.
WARNING! Failure to follow the instructions in this section may result in
damage to the components on your bicycle and will void your warranty, but,
most importantly, may result in serious personal injury or death. If your bicycle
exhibits any signs of damage, do not use it and immediately bring it to your
Authorized Specialized Retailer for inspection.
WARNING! When placing the frame and/or bicycle in a repair stand, clamp
the stand to the seatpost and not the frame. Clamping the frame can cause
damage to the frame that may or may not be visible, and you may lose control
and fall.
4. SPECIFICATIONS
4.1. GEOMETRY
FRAME SIZE S2 S3 S4 S5
STACK (low BB) (mm) 616 620 629 638
REACH (low BB) (mm) 437 464 487 511
HEAD TUBE LENGTH (mm) 95 100 110 120
HEAD TUBE ANGLE (low BB) (°) 63.9 63.9 63.9 63.9
HEAD TUBE ANGLE (high BB) (°) 64.3 64.3 64.3 64.3
BB HEIGHT (low BB) (mm) 347 347 347 347
BB HEIGHT (high BB) (mm) 354 354 354 354
BB DROP (low BB) (mm) 28 28 28 28
BB DROP (high BB) (mm) 21 21 21 21
TRAIL (low BB) (mm) 132 132 132 132
FORK LENGTH (full) (mm)
581 581 581 581
FORK RAKE/OFFSET (mm) 46 46 46 46
FRONT CENTER (low BB) (mm) 777 806 833 862
CHAINSTAY LENGTH (mm) 442 442 442 442
WHEELBASE (mm) 1217 1246 1274 1302
TOP TUBE LENGTH (horizontal) (mm) 591 619 644 670
SEAT TUBE LENGTH (mm) 400 420 440 465
SEAT TUBE ANGLE (low BB) (°) 76 76 76 76
SEAT TUBE ANGLE (high BB) (°) 76.4 76.4 76.4 76.4