15
1.6. ATTENDANT BRAKES (when fitted)
To
•
put the brakes on, Squeeze both brake levers (Fig.1.6a) until the brakes are
securely on then let go of the lever as this will stay in place.
To
•
release the brakes, Squeeze both locking levers under the brake levers (Fig.1.6b)
and allow the brake levers to return to the off position, then let go of the locking levers.
Never
•
let go of the wheelchair unless both wheel brakes are applied.
1.7. STORAGE TRAY
To extend the tray: Release
•
the knob at the rear of the tray (Fig.1.7a), let the wheels
down until touching the floor and then tighten the knob.
Press
•
the release button at the front of the tray (Fig.1.7b), firmly push the tray out to
release the catches under the tray until tray comes up against it’s stops.
To
•
retract the tray: Push the tray back under the chassis until the catches underneath
the tray and the release pin at the front engage.
Release
•
the knob at the rear of the tray (Fig.1.7a), raise up the wheels and tighten the
knob. DO NOT push the wheelchair with the wheels lowered.
Any
•
equipent stored in tray MUST be securely tied down during transport.
Fig.1.6b
Fig.1.7b
Fig.1.6a
Fig.1.7a
