11
USER GUIDE 1.0
PREPARING THE WHEELBASE FOR USE
1.1. UNFOLDING THE HANDLES
Make
•
sure that both brakes (refer to page 3 for brake type) are applied to the rear
wheels (Fig.1.1a).
Pull
•
handle upwards until it is up against the stops (Fig.1.1b).
Slide
•
the handle locking catch over the base upright until it reaches the stops
(Fig.1.1c), the locking pins will automatically pop into place.
Fig.1.1b
Fig.1.1c
Fig.1.1a
