12
Chapter 4
How to Operate
When using this product as a power amp
4
3,7
1
Set the VOL. LED/MODE switch on the rear panel of this
product to POWER AMP.
2
With the preamplifier (AV amplifier) volume level turned
all the way down, turn on the power of the playback
device and preamplifier (AV amplifier).
3
Lift up the front panel POWER switch while pulling out
on it to turn on the power.
Check that the front panel ON indicator is lit.
4
Select the input to this product.
Rotate the LINE SELECTOR to select
the terminal (LINE 1 - LINE 5) to which
the preamplifier (AV amplifier) is
connected.
5
Select the input on the preamplifier (AV amplifier) side
and begin playback on the playback device.
6
Perform volume level adjustments during playback on
the preamplifier (AV amplifier) side.
When the VOL. LED/MODE switch is set to POWER AMP, the
volume level is fixed at approximately 20dB regardless of
the VOLUME (level adjustment knob) position, so volume
level adjustments cannot be made on this product.
7
When playback is finished, turn the preamplifier (AV
amplifier) volume all the way down, and shut off the
power of this product first, then the preamplifier (AV
amplifier) power.
Be sure to turn the preamplifier (AV amplifier) volume level
all the way down. To turn this product off, push down the
POWER switch while pulling out on it.
Caution
•
When turning the product on immediately after turning it off,
check to make sure that the OFF (WAITING) indicator has gone off
completely. (
page 9)
