10
Chapter 3
Part Names
1
AC IN terminal
Connect the included power cord. (
pages 5, 6, 8)
2
Fuse
The fuse may break if something abnormal occurs to the
product. Contact us if the fuse breaks. (
page 15 )
3
REMOTE CONTROL terminal
Connect the (separately sold) remote control. Contact us
for details regarding the (separately sold) remote control.
(
page 14)
4
Speaker terminal (R (right) channel)
Speaker terminal (L (left) channel)
(
pages 5 to 7)
5
Audio input terminals (LINE 1 - LINE 3)
RCA type input terminal. (
pages 5, 6, 8)
6
Balanced input terminal (LINE4, LINE5)
XLR type input terminal (female). (
pages 5 to 7)
7
VOL. LED/MODE switch
Switches the VOLUME (level adjustment knob) and the LINE
SELECTOR(input switching knob) brightness and volume
level adjustment mode. (
see below)
NOTE (Regarding the VOL. LED/MODE switch)
The VOLUME (level adjustment knob) and the LINE SELECTOR (input switching knob)
brightness (
) and volume level adjustment mode (
,
) can be set using the dual
purpose VOL. LED/MODE switch.
Set the VOLUME (level adjustment knob) and the LINE SELECTOR(input switching knob)
brightness to either ON (light on) or OFF (no light) according to your preference. The
switch is set to ON (light on) at time of purchase.
3
2
1
Set to NORMAL AMP. when using as a pre-main amplifier.
Set to POWER AMP. when using as a power amplifier. Before using, remove the protective sticker (
) attached at time of
purchase.
* In POWER AMP. mode the VOLUME (level adjustment knob) and the LINE SELECTOR (input switching knob) of the product becomes inactive,
and the level is fixed at approximately 20dB. Level adjustments must be performed on the preamp (AV amp) side.
* When the VOL. LED/MODE switch is set to POWER AMP., the VOLUME (level adjustment knob) and the LINE SELECTOR (input switching
knob) brightness is set only to OFF (no light).
Rear panel
1
2
3
5
6
7
4
