Spearhead TWIGA FLEX 567, Руководство пользователя

Страница: 2 / 54

TWIGA FLEX
1
IMPORTANT
VERIFICATION OF WARRANTY REGISTRATION
DEALER WARRANTY INFORMATION & REGISTRATION
VERIFICATION
It is imperative that the selling dealer registers this machine with Spearhead
Machinery Limited before delivery to the end user
– failure to do so may affect the
validity of the machine warranty.
To register machines, go to the Spearhead Machinery Limited web site at
www.spearheadmachinery.com , log o
nto ‘
Dealer Inside
’ and select the
‘
Machine Registration button
’
which can be found in the Service Section of the
site. Confirm to the customer that the machine has been registered in the section
below.
Should you experience any problems registering a machine in this manner please
contact the Spearhead Service Department on 01789 491867.
Registration Verification
Dealer Name:
……………………..…………………………………………………………….
Dealer Address:
…….………………………………………………………………………….
Customer Name:
……………………..…………………………………………………………
Date of Warranty Registration:
……/……/...…… Dealer Signature: ………………..……
NOTE TO CUSTOMER / OWNER
Please ensure that the above section has been completed and signed by the
selling dealer to verify that your machine has been registered with Spearhead
Machinery Limited.
IMPORTANT: During the initial ‘bedding in’ period of a new machine it is the
customer’s responsibility to regularly inspect all nuts, bolts and hose
connections for tightness and re-tighten if required. New hydraulic
connections occasionally weep small amounts of oil as the seals and joints
settle in
– where this occurs it can be cured by re-tightening the connection
– refer to torque settings chart below. The tasks stated above should be
performed on an hourly basis during the first day of work and at least daily
thereafter as part of the machines general maintenance procedure.
CAUTION: DO NOT OVER TORQUE HYDRAULIC FITTINGS AND
HOSES