Spearhead ROLLIFLAIL 150, Инструкция оператора

Страница: 42 / 53

8999118EN: v1.1 21/12/2020
42
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
9 Maintenance
For routine maintenance or repair spare parts may be obtained from the Spearhead parts department.
Where parts are broken, damaged and deemed not fit for use; replace with genuine Spearhead parts using the
online Interactive Parts facility at:
https://my.spearheadmachinery.com/parts/public-interactive-parts-database/
9.1 Regular Preventative Maintenance
All maintenance, cleaning and repair operations must be performed with the machine firmly lowered to the
ground and detached from the tractor or with the PTO disconnected, engine switched off and starting key
removed. For any repairs or maintenance that requires access from underneath, the machine should be firmly
and safely raised and propped using suitable purpose designed supports capable of bearing the machines full
weight. Care should be adopted at all times when working with or under a raised machine.
Daily maintenance operations facilitate the removal of mud or other material from rotating parts (bearing, pins
etc.) in order to avoid rust and possible seizures. This helps to prolong the service life of the machine.
Maintenance schedule
Ref: Interval Function Maintenance action
1 First 2 hrs Belts From new (or after fitting new belts) check belt tension and taper lock
tightness
– re tension and tighten if necessary
Bolts and nuts From new tighten
2 Every 8hrs Bolts and nuts Tighten
Flails Check wear and condition
Guards Check that all safety guards including the PTO guard are in good
condition and replace if worn, cracked or damaged
Belts Check belt condition and tension
Cowl and headstock Check visually for damage caused by previous work
Gearbox Check lubrication levels
Extension tube Check lubrication levels
Grease points Grease at each grease point marked by a grease decal
PTO shaft Grease the PTO shaft tubes regularly
Check chains Ensure the guard check chains are securely attached and in good
condition
3 First 50hrs Gearbox Drain and replace oil.
Filters (if fitted) Replace filter elements
4 Every week PTO universal joints Grease universal joints at both ends of the PTO shaft. Check bearing
journals for roughness or slackness and replace if necessary.
5 Every month Rams (if fitted) Check ram caps for tightness and if necessary tighten immediately
Pins Check all pins for damage, wear and correct retention.
6 Every 500hrs Filters (if fitted) Replace filter elements
7 Every 1000hrs
or annually
(whichever is
earlier)
Gearbox Drain and replace oil.
Drive-tube Drain and replace oil.
9.2 Drive Components
9.2.1 Power-Take-Off Shaft (PTO)
The normal agricultural type of PTO shaft is used. Spares kits; comprising for example; the spider, needle
bearings, circlips; are available from your dealer.
Some routine maintenance is needed to ensure a trouble-free life of the PTO shaft.