8999118EN: v1.1 21/12/2020
10
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.4
Machine General Specification
Rolliflail Series (1)
Rolliflail 150
Rolliflail 180
Rolliflail 210
Tractor
Horsepower
40
45
50
Weight
1500 kg
Pto
Type
Live
Speed
540/1000rpm (+/-5%)
Size
34.9mm (1 3/8 inch), 6 spline
Gearbox
Capacity
1.5 Litres
Mower
Mass (From CAD)
360kg
400kg
420kg
Dimensions
(1) (4)
Overall Width
1777mm (70”)
2136mm (84”)
2434mm (96”)
Cutting width
1447mm
(57”)
1
807mm (71”)
2109mm (83”)
Overall length
(Behind the tractor)
922mm
(36”)
Height to top link pin
867mm (34
”)
Transport overhang
(2)
1727mm (68”)
Drive
Rotor Drive
V Belt
V Belt
V Belt
Number of drive belts
2
2
2
Shaft
Speed
Nominal shaft output speed (rpm)
[540rpm PTO/1000rpm PTO.]
(3)
2200
2200
2200
Flail Type
Twisted (38mm) (Quantity)
48
60
70
Cut Height
Min (mm)
15mm (0.6”)
Max (mm)
100mm (3.9”)
Notes:
(1) Spearhead constantly reviews and improves product designs and reserve the right to change this
information. Actual machines may vary from the above specification. Contact your Spearhead
Sales representative if you have any queries.
(2) The transport overhang is indicative and will vary with the specified tractor. This figure assumes a
reference dimension of
805mm (32
”)
between rear axle centre and mower rotor centre.
(3) Figures quoted for shaft rpm are dependent on the pulley configuration.
(4) All dimensions are determined from computer models, so actual measurements may vary slightly.
The following figures for Reach dimensions, Transport position and Shipping position illustrate the Rolliflail 210
only.
Figure 1.4 Reach Dimensions
