RHD Series RHD
230/250/280
20
Transport
The following must be observed at all times when transporting the machine:
•
Machine must always be switched off.
•
Machine must be raised and placed into its central position.
•
Speed must be kept to a minimum especially on bumpy roads or terrain.
•
Always abide with local laws and road regulations.
•
Be aware of the machines width.
Detachment & Storage
Detaching the machine from the tractor
•
Removal of the machine should be performed on a firm level site. The
procedure for detachment is as follows:
•
Place the machine in its central position.
•
Gently lower the machine fully to the ground.
•
Switch off the tractor and remove its starting key.
•
Detach hydraulic hoses from the tractor service and stow them neatly on
the machine.
•
Remove the PTO driveshaft.
•
‘Chock’ the rear roller to prevent movement of the machine during the
detachment procedure and whilst in storage.
•
Remove the top link and both pins from the lower attachment points.
•
Carefully and slowly drive the tractor clear of the machine.
•
Clean and lubricate the machine in preparation for next use.
Storage
For extended periods of storage it is advisable that the machine be kept in a
clean dry environment protected from the elements to avoid risk of corrosion.
The machine should be thoroughly cleaned and lubricated prior to storage. At
this point it is good practice to check the machine for worn or damaged
components - any parts that require replacing should be ordered and fitted at
the earliest opportunity so the machine is fully prepared for the next seasons
work.
