RHD Series RHD
230/250/280
13
SAFETY DECALS
1. Always switch machine off, remove starting key and read instruction
manual before performing service or maintenance work on the
machine.
2. Keep a safe distance from the machine at all times - risk from
projection of objects.
3. Risk of hand injury
– always ensure all guard are fitted and in place
when machine is operating.
4. Risk of feet injury
– keep at a safe distance from the machine when it is
operating.
5. Never stand or ride on the machine.
Vehicle /Tractor Preparation
We recommend vehicles are fitted with
cabs using ‘safety glass’ windows and
protective guarding when used with our
machines.
Fit Operator Guard (part no. 73 13 324)
using the hooks provided. Shape the mesh
to cover all vulnerable areas.
Remember the driver must be looking
through mesh and/or polycarbonate glazing
when viewing the machine in all positions - unless the vehicle/ cab
manufacturer can demonstrate that the penetration resistance is equivalent to,
or higher than, that provided by mesh/polycarbonate glazing. If the tractor has
a roll bar only, a frame must be made to carry both mesh and polycarbonate
glazing. The operator should also use personal protective equipment to
reduce the risk of serious injury such as; eye protection (mesh visor to
EN1731 or safety glasses to EN166), hearing protection to EN352, safety
helmet to EN297, gloves, filter mask and high visibility clothing.
Vehicle Ballast
It is imperative when attaching ‘third-party’ equipment to a vehicle that the
maximum possible stability of the machine and vehicle combination is
