8999123: v1 18/06/2018
Page 1.9 of 1.10 pages
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
1.3
Identification
Each flail mulcher is equipped with a serial plate; see Figure 1.3 that includes the following data in this order:
- EC Marking.
- Manufacturer marking.
- Name and address of the manufacturer.
- Machine Whole Goods Code (WGC).
- Machine Product Group Code.
- Serial number of the machine.
- Year of construction.
- Mass in kg.
- Model year.
Figure 1.3
Data on the manufacturer’s plate should always be referred to when requesting assistance and/or supply of spare
parts.
This data can identify the flail mulcher and its characteristics, certifying that it responds to current regulations. For this
reason the plate
should never therefore be removed
nor be used for other purposes; if the flail mulcher is
dismantled, it should be destroyed to prevent any form of abuse.
1.4
Machine general specification
Destroyer Flail Series (1)
HD 250F
RHD 280
Working Width
250cm
HP Power Requirement
130-200hp
Number of Teeth
72
Weight
2750kg
Width
292cm
Length
145cm
Height
120cm
Hitch To Tractor
3-point Universal
PTO Speed
1000 rpm
Primary Transmission
PTO Input Shaft
Secondary Transmission
Belts
Rear Hood
Hydraulic
Tractor Connection
Standard hydraulic outlets
Notes:
(1) Spearhead constantly reviews and improves product designs and reserve the right to change this
information. Actual machines may vary from the above specification. Contact your Spearhead Sales
representative if you have any queries.
1.5
Sound Level
The air noise level created by the mulcher under operating conditions was detected using a sound level meter with
integrator.
The measurements were carried out in accordance with ISO 1680-2 at the operator station with the mulcher activated
empty. Tests performed under the conditions indicated by the standard produced the following results:
Supplier Information
Machine
Whole Goods
Code (WGC)
Product Group Code
Machine Serial
Number
Production Year
Weight (kg)
Model Year
