8999153EN: v1.0 18/12/2020
21
Original instructions (ENGLISH)
Website: www.spearheadmachinery.com
Comply with the local law concerning lights, warning and safety signs.
The driver and/or the owner of the machine have the responsibility of complying with the local Road
Traffic Acts.
The tractor's manoeuvrability should not be adversely affected. The steering axle of the tractor should
be loaded with at least 20% of the tractor’s dead weight.
Carrying passengers on the machine is strictly prohibited.
3.4.2
Before Driving On Public Roads
The machine should be raised on the lift arms to the Transport Position and the following checks made:
Is the machine correctly coupled with all securing pins and clips in position?
Does the machine have any loose or unsecured parts?
Are the tractor’s lights, indicators and beacon working correctly and are they all clearly visible?
Are there any bystanders or children in the immediate area? If so, ask them to clear the area before
moving off.
3.4.3
Driving On Public Roads
Check the area around the machine before you start. Be aware of children in the danger area of the
machine.
Do not exceed 30 km/h.
Adjust the speed according to the road conditions.
Avoid sudden sideways movement with the machine attached.
Make sure that steering and braking ability are not compromised.
Take care when turning corners, as the machine may swing out into the path of other road users.
3.5
Machine Storage
3.5.1
Safely Preparing For Storage
WARNING!
The machine must be correctly secured when parked in storage. A correctly secured
machine prevents serious accidents. If the machine is not properly secured when parked it can result in
serious injuries or death.
Therefore, when disconnecting, make sure that:
The machine is placed on a firm and level surface.
The tractor cannot roll after being disconnected.
The tractor has stopped, the parking brake is applied and the starter key is removed.
The machine has come to a complete stop.
Children are never allowed to play close to the machine.
3.5.2
Storing The Machine
If the machine is due to be left unused for a long period, it should be stored in a place where it will not be
exposed to the elements and should be protected to avoid deterioration.
Before storing, we recommend cleaning the whole machine thoroughly and suitably lubricating all mechanical
parts to protect them from rust.
Make sure storage temperature is in the range 0°C to 50°C.
Before mothballing the machine, it is advisable to proceed as follows:
