26
27
AFTER sAlEs suppoRT
01904 727505 www.spearandjackson-power.com
www.spearandjackson-power.com
AFTER sAlEs suppoRT
01904 727505
MaINTENaNCE
TEChNICaL DaTa
v Check the washer is still slightly domed to keep the
pressure on the bold to stop it unwinding, keeping the blade
firmly secure. Replace the washer (right way round!) and
bolts. Note: If washer has lost its dome and become flat it
must be replaced.
vi Make sure the blade is correctly located, and then firmly
tighten the bolt. Do not over tighten. The upturn of the
blade must project into the motor compartment.
note!
If you are unsure about performing this operation call our
helpline or go to an authorized dealer to change the blade for
you.
Recycling and disposal
• The product comes in a package that protects it against
damage during shipping. Keep the packaging until you are
sure that all parts have been delivered and the product is
functioning properly. Recycle the packaging afterwards.
• Old products are potentially recyclable and do not, therefore,
belong in your household rubbish. You are requested to
assist us and our contribution to saving resources and
protecting the environment by handing in this product at an
equipped collection centre (if there is one available).
Property
Value
Engine type
Single cylinder 4-stroke
Engine displacement
125cc
Engine power
1.8kW/ 3000/min
Engine speed
3000rpm
Cutting width
41cm
Grass bag capacity
50L
Ignition
T.C.I
Fuel tank capacity
0.8L
Oil tank capacity
0.5L
Meassured sound power level
93 dB(A)
Guaranteed sound power level
96 dB(A) K=3dB(A)
Vibration
5m/s
2
k=1.5m/s
2
Spark type
QC12YC
Net weight
22.5kg
The sound values have been determined according to noise test code given in EN 60335-2-
77, using the basic standards EN ISO 11201 and EN ISO 3744.
The sound intensity level for the operator may exceed 80dB(A) and ear protection measures
are necessary.
The declared vibration value has been measured in accordance with a standard test method
(according to EN 60335-2-77) and may be used for comparing one product with another. The
declared vibration value may also be used in a preliminary assessment of exposure.
WARNING! Depending on the actual use of the product the vibration values can differ from the
declared total! Adopt proper measures to protect yourself against vibration exposures! Take
the whole work process including times the product is running under no load or switched off
into consideration!
Proper measures include among others regular maintenance and care of the product and
cutting attachments, keeping hands warm, periodical breaks and proper planning of work
processes!
