2
Please read these instructions carefully
before installing and operating the
petrol motor scythe!
Petrol Engine Quick Start Guide
Ensure correct fuel/oil mixture 40:1
STARTING
1.
Place the trimmer on a hard, level surface.
2.
Switch on the ignition (set switch to RUN)
3.
Press the fuel primer button ten times
minimum.
4.
Set the choke lever to CHOKE.
Note - the amount of Choke will vary slightly
depending on the weather conditions, a
small amount of experimentation is advised.
5.
Set the throttle lever to full throttle.
6.
Hold the handle firmly when the throttle lever
is locked in place.
7.
Pull the starter rope four times.
8.
Set the choke lever to START and pull four
times.
9.
Set the choke lever to RUN after the motor
has been running for ten seconds.
Note - this quick start guide is intended for
experienced users who have already
assembled the tool, please refer to the
manual for details.
If machine does not start after minimum 6 pulls
on starter cord refer to petrol Engine Q & A on
page 16.
Anleitung SPJBC 28 11.10.2006 17:47 Uhr Seite 2
