20
AFTER SALES SUPPORT
0345 605 2070
MAINTENANCE
1.Clean machine body
3.Change engine lubricant oil
Clean the machine shell, handle and some plastic
covers after working, care some necessary parts with
clean cloth,extend the life of product.
Install the blade cover when you store for long time.
When install blade cover,you need to squeeze the
cover carefully,and easy to insert.
Open the oil tank cap and drain the old oil to an
approved container.
Return the engine to an upright position and refill with
fresh lubricant.
NOTE: Dispose of the old oil according to local
regulations.
2.Check engine lubricant level before
each use:
1)Separate the attachment from the power head.
2)Set power head on a flat level surface with shaft
parallel to surface.
3)Unscrew the oil cap and remove.
4)Lubricant level should fall within the top of oil fill hole
(the top of screw thread).
5)If level is low, add engine lubricant until the fluid level
rises to the top of oil fill hole (the top of screw thread)
and does not overfill.
6)Replace and tighten the oil cap.
Содержание S2655HP
Страница 29: ......
