Spear & Jackson S2655HP, Инструкция по эксплуатации

Страница: 14 / 29

AFTER SALES SUPPORT 0345 605 2070 13
ASSEMBLE
The hedge trimmer has been assembled in the standard delivery so no need for extra
assembling steps.
Add engine lubricant Oil: Initial use
1) Set the unit on a flat surface.
2) Remove the oil cap from the machine
3) Pour 60ml 4 stroke garden engine oil
into lubricant cup. (Oil type:SAE 10W30)
4) Add lubricant oil from the cup into the
lubricant oil tank.
5) Screw and tighten the oil cap.
1
PREPARE
Fueling
Position the unit with the fuel cap facing
up.Remove the fuel cap.
Place the fuel container spout into the fill hole
on the fuel tank and fill the tank.
Wipe up any petrol that may have spilled. Re-
install the fuel cap.move the unit at least 30 ft.
(9.1 m) from the fuel container and the fueling
site before starting the engine.
NOTE: Do not overfill the tank.
2
WARNING: OVERFILLING THE CRANKCASE MAY CAUSE
SERIOUS PERSONAL INJURY. Check the oil level
before each use. The importance of maintaining the
proper oil level cannot be overemphasized. Change
the oil according to the Maintenance Schedule.
Use 4 stroke garden engine oil. DO NOT use dirty oil.
Failure to use clean oil of the correct type can cause
premature engine wear and failure.