28
Customer Helpline
0151 649 1500
Introduction
How to Use the Chainsaw
WARNING!
Before attempting to use the chainsaw, it is imperative that you undertake professional
training by an accredited body. This will provide full instruction on the type of sawing and cutting
operations that can be performed complete with relevant safety training.
Cutting and sawing with a chainsaw can be very dangerous if undertaken without proper training.
WARNING!
Never attempt to start or operate the chainsaw if you suspect there is spilt fuel or
any other flammable gases/liquids in the area. Failure to observe this notice may present a risk of
explosion.
WARNING!
Always be aware of the proximity of any part of your body to the saw chain while the
operating the chainsaw. Ensure the saw chain is kept away from legs, feet and body at all times.
Failure to observe this warning may lead to serious personal injury or death.
WARNING!
Always wear fully enclosed safety goggles when operating the chainsaw to protect your
eyes from flying dust and debris. Failure to observe this warning may lead to irreparable damage to
your eyes.
WARNING!
Always wear suitable ear plugs or ear defenders when operating the chainsaw to protect
your hearing. Prolonged exposure to the loud noise produced by the chainsaw may lead to hearing
loss or impairment.
WARNING!
Always wear suitable gloves when operating chainsaw to protect your hands from flying
debris and/or sharp objects. It is particularly important to wear protective gloves when assembly or
maintaining the saw chain.
IMPORTANT!
Hold the saw firmly with both hands. Place your right hand on the rear handle
and your left hand on the front handle.
Noise emission complies with Directive 2000/14/EC.
This chainsaw can be used to perform the following types of cutting and sawing operations:
• Felling - Used to cut down large trees.
• Limbing - Used to remove branches and larger limbs from a tree trunk.
• Bucking - Used to cut large logs or trunks into smaller lengths.
The following steps provide a brief overview of each type of cutting operation. Always undertake
full professional training before using the chainsaw to perform any of these types of cuts.
