Spear & Jackson 37 cc Скачать руководство пользователя страница 50

Страница: 50 / 60

Customer Helpline

0151 649 1500

Step 4 - Clean / Replace the Spark Plug (continued)

Maintenance

4f. Refit the Spark Plug

CAUTION!

Only use the large end of the supplied multi tool to remove the spark plug. Using any other

tool may damage the spark plug and/or the chainsaw engine.

NOTE!

If the spark plug is not being replaced, clean the existing spark plug with a copper wire brush

and check the electrode gap using suitable feeler gauges. The gap must be 0.6 mm.

Refit the spark plug

to the chainsaw engine using the large end of the supplied multi tool. Do Not

overtighten the spark plug.

Refit the ignition cable

to the spark plug

Ensure the ignition cable is fully seated on the end of

the spark plug

Refit the air filter

to the chainsaw ensuring it is correctly positioned over the locating pin

Refit the air filter cover

to the chainsaw ensuring it is correctly seated on all sides.

Tighten the retaining cap

by turning clockwise. Do not over tighten the retaining cap

as this

may cause damage to the air filter cover

and retaining cap

Содержание 37 cc





























































Результаты поиска

Содержание 37 cc

Отзывы:

Похожие инструкции для 37 cc

Бренды по названию

Популярные бренды

Spear & Jackson 37 cc, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание 37 cc

Отзывы:

Похожие инструкции для 37 cc

Бренды по названию

Популярные бренды