SoundSource Owner’s Manual
Page 15
CD REPEAT PLAYBACK
1. Press the
Preset/Repeat
button once on the front panel
before or during CD playback to select Repeat 1 Track
function. (Or press
Repeat
button on the Remote con-
trol.) The “Repeat 1” indicator will flash on the display.
(See
Diagram 20.)
2. Press the
Preset/Repeat
button twice on the front panel
before or during CD playback to select Repeat All Tracks
function. (Or press
Repeat
button on the Remote Control.)
The “Repeat” indicator will illuminate on the display.
(See
Diagram 21.)
3. Press the
Preset/Repeat
button three times on the front
panel to deselect Repeat function. (Or press
Repeat
button
on the Remote Control.)
CD MEMORY PROGRAMMING
1. In CD stop mode, press the
Tuning/Search
buttons on the
front panel or
Station/Track
on the Remote Control
until the desired track number that you wish to program
appears in the display.
2. Press the
Memory
button on the front panel or on the
Remote Control to select the program number that appears
in the display.
3. The “Memory” indicators will flash.
(See Diagram 22)
4. Select another desired track number and store the track into
the CD program by following steps 1 - 3.
5. Up to 20 CD tracks can be programmed. When the 20 tracks
have been stored, “MEM FULL” will appear in the display.
6. When the CD is stopped, press
Stop/Clear
longer than
1
⁄
2
second to erase the program.
CD MEMORY PLAYBACK
1. Once the CD tracks have been programmed, the “Memory“
indicator will illuminate.
2. Press
Play/Pause
button to start the CD program playback.
3. When the CD is stopped, press
Stop/Clear
button longer
than
1
⁄
2
second to erase the CD program.
Diagram 20:
CD Repeat 1 Playback
Diagram 21:
CD Repeat All Tracks Playback
Diagram 22:
Memory Indicator
Diagram 23:
CD Memory Playback
