Page 10
SoundSource Owner’s Manual
REMOTE CONTROL
(See Diagram 12)
1.
Power Off
Press to switch the system power Off.
2.
Mute
Press to lower the volume completely. “MUTE ON” shows
in the display. When you press the mute button again, the
volume level will return to its previous setting.
NOTE:
The Mute function can also be turned off by pressing
either of the volume buttons or most other buttons on the
remote control.
3.
Sleep
Press to select Sleep mode and set Sleep Timer from 10 to
90 minutes. For details, see page 13.
4.
Adjust
Press (+) or (-) to adjust the Balance, Treble or Bass level. For
details, see page 13.
5.
Source/Power On
Press this button to turn system power on or press repeat-
edly to cycle through the input sources of FM, AM, AUX1, or
AUX2.
6.
Alarm 1
Press to select Alarm 1 wake up function. For details, see
page 12.
7.
Alarm 2
Press to select Alarm 2 wake up function. For details, see
page 12.
8.
Clock Set
Press to select Clock Set mode. For details, see page 12.
9.
Alarm Set
Press to select Alarm Set mode. For detail, see page 12.
10.
CD Time
In CD mode, press to show Total Track and Total Time.
11.
Memory
• In Tuner mode, press to store AM/FM stations in the
memory locations. For detail, see page 16.
• In CD mode, press to store a CD track in the memory
locations. For details, see page 15.
12.
Random
Press to select Random Play function in CD mode. For
details, see page 14.
13.
Repeat
Press to select Repeat Play function in CD mode. For
details, see page 15.
Diagram 12:
Remote Control
The Remote Control is shipped with the battery removed. Push the tab in to slide open the panel on the lower rear of the remote
and insert the battery as indicated.
