MODE 3.1 Installation Instructions
Page 31
POWER ON
1.
Roll
the
Scroll Wheel
to
highlight
a
Source
on the
LCD
. (If the Keypad is in ‘Standby’
rolling the Scroll Wheel or pressing any button will wake up the Keypad.)
2.
Press
the
Click Button
to
select
the
Source
. The Zone will turn ON. The Source se-
lected will be displayed at the top of the LCD. (Refer to
Figure 32
)
POWER OFF
Zone
1.
Press
the
Zone Power Off Key
for less than 2 seconds. A red
OFF
and the message:
“Source Not Selected”
will appear at the top of the LCD. (Refer to
Figure 31
) Unless
the local zone is the last zone to be turned off, the zone will turn off and the common
sources will stay on. If the local zone is the last zone to be turned off the common sources
will turn off as well.
IPOD 1: 30G VIDEO
IPOD 2: NANO
DVD CHANGER
CD CHANGER
TUNER 1
TUNER 2
SOURCE NOT SELECTED
OFF
IPOD 1: 30G VIDEO
IPOD 2: NANO
DVD CHANGER
CD CHANGER
TUNER 2
OPERATING THE MODE 3.1
The following describes basic source, zone and system control in a typical MODE 3.1/MZC installation. Functions may vary
given the programming options for the Hard keys and Virtual Buttons.
Figure 31
MODE Main Menu
Whole House
1.
Press and Hold
the
Power Off Key
for longer than 2 seconds. All zones and sources will turn off, unless
“This Zone
Ignores Other Zone Initiations”
is selected under
Zone Setup/Whole House/Mute
in
EZ-Tools
for a given zone. If
selected, that zone will ignore the Whole House Power Off Command and the common sources will stay on until the last
zone is turned off.
SELECT A SOURCE
1.
Roll
the
Scroll Wheel
to
highlight
a
Source
on the
LCD
. (If the Keypad is in ‘Standby’ rolling the Scroll Wheel or press-
ing any button will wake up the Keypad.)
2.
Press
the
Click Button
to
select
the
Source
. The Zone will turn ON. The Source selected will be displayed at the top of
the LCD. (Refer to
Figure 32
)
ADJUST VOLUME
1.
Rotate the Volume Knob clockwise
to turn
volume up
. (The blue LEDs surrounding the knob will provide a visual
reference to the volume setting.)
2.
Rotate Volume Knob counter-clockwise
to turn
volume down
. The blue LEDs surrounding the knob will provide a
visual reference to the volume setting.
MUTE
Local Room or Zone
A local room or zone can be muted/un-muted by pressing the Volume Knob for less than 2 seconds.
1.
Push
the
Volume Knob
to
mute
the zone preamp or local speakers controlled with Speaker Relay Mutes. A red
MUTE
will appear at the top of the LCD.
2.
Push
the
Volume Knob
to
un-mute
the zone preamp or local speakers. The red MUTE at the top of the LCD will turn
off.
