• When setting up the product, make sure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• Consult an expert when in doubt about operation, safety or connection of the
device.
•
Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operation
Should your products not have the required inputs or outputs, use a suitable adaptor.
Only use suitable cables for cabling. In case of doubt contact a specialist.
Turn off the input device (e.g. DVD player) and output device (e.g. TV) and disconnect them
from the power supply.
Never use the product immediately after it has been brought from a cold room into a
warm one. The condensation generated could destroy the product.
a) Connecting input (INPUT)
• Connect the input device’s cinch plugs to the
R
(audio, right, red),
L
(audio, left, white) and
CVBS
(video, yellow) sockets on the converter.
• Connect the Mini-USB plug to the converter.
• Connect the Mini-USB cable to an external USB power source (e.g. computer).
b) Connecting output (OUTPUT)
• Connect a suitable HDMI cable to the HDMI socket on the convertor.
• Connect the HDMI cable’s other end to the output device.
c) Operation
• Select the resolution (720p or 1080p) using the selector switch next to the Mini-USB input.
Observe the operating instructions for the output device.
• Connect the input device and the output device to the power supply and start playback.
• If necessary, the supplied rubber feet can be attached to the bottom of the product. Rubber
feet may leave traces on delicate surfaces.
Maintenance and cleaning
• The product requires no servicing on your part aside from occasional cleaning. Only use a
dry, anti-static and lint-free cloth for cleaning.
• Do not use any chemical or abrasive cleaning agents.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
Dispose of the product according to the applicable statutory provisions at the end of
its service life.
Technical data
Supports ....................................... PAL, NTSC3.58, NTSC4.43, SECAM, PAL/M, PAL/N
Supported resolution .................... 720p/60 Hz, 1080p/60 Hz (switchable)
Power consumption ...................... max. 500 mA
Input.............................................. composite (3x cinch)
Output ........................................... 1x HDMI
Operating conditions ..................... 0 to +40 °C, 20 to 90 % RH (not condensing)
Storage conditions ........................ -20 to +60 °C, 20 to 90 % RH
Dimensions (W x H x D) ............... 66 x 20 x 55 mm
Weight .......................................... 38 g
Operating instructions
Composite / HDMI Converter
Item No. 989286
Intended use
This product is designed to convert an analogue composite signal (video and audio) into a
digital HDMI signal. It enables the connection of a device with analogue audio and video signal
to an output device with an HDMI input. The resolution can be set with the selector switch, at
either 720p/60 Hz or 1080p/60 Hz (Full HD). The power is supplied via an external USB source,
e.g. computer (Mini-USB cable is included in the delivery).
It is intended for indoor use only. Do not use it outdoors. Never expose it to moisture, e.g. in
bathrooms.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged.
Furthermore, improper use can cause risks such as short circuit or fire. Read the instructions
carefully and keep them. Make this product available to third parties only together with its
operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• Converter
• Mini-USB cable
• 4 x rubber feet
• AV cable
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Also observe the safety and operating instructions of any other devices which are
connected to the product.
• Only connect devices to the connectors of the converter that have matching
connectors.
•
Make sure that the converter is sufficiently ventilated during operation. Do not
cover the device with magazines, blankets, curtains or similar items. Keep a
minimum distance of approx. 5 cm to other objects.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in
electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2017 by Conrad Electronic SE.
*989286_v1_0817_02_mxs_m_en
