VGA to HDMI converter with audio
Item no.: 1267609
Version 11/14
© Copyright 2014 by Conrad Electronic SE.
1267609_v1_1114-DS
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
Intended use
The product is designed to convert a VGA video signal and an analogue (R/L) or digital (S/PDIF) audio signal
into an HDMI signal. The audio input signal to the converter (R/L or S/PDIF) is selected using the switcher
on the product. Power is supplied via a USB power source, e.g. a computer, USB power supply or USB hub.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery content
•
Converter
•
Jack to cinch audio adapter
•
Micro USB cable
• 4 x rubber feet
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
•
Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
-
has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Also observe the safety and operating instructions of any other devices which are connected to the product.
• Ensure that the cables of the product are not bent or squashed.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
Operating elements
1
5
4
3
2
6
7
1 USB power input
5
AUDIO IN
audio input
2
POWER
LED
6
SPDIF IN
audio input
3
HDMI OUT
HDMI output
7
VGA IN
VGA input
4
SWITCHER
Operation
• If necessary, attach the rubber feet included to the base of the product.
• Ensure that you refer to the operating instructions of the devices that you are going to connect. Turn off all
devices and remove their mains plugs from the mains socket.
•
Connect the
VGA IN
VGA socket (7) to the VGA video output, e.g. a PC graphics card or a laptop. Use the
VGA cable of a computer monitor to establish the connection (VGA cable not included with the product).
• If the audio playback of the computer takes place via HDMI, connect the
Audio IN
input (5) to the audio
output (line level) on your computer. Use a cable with 3.5 mm stereo jack plugs.
Use the audio adapter included if you are using an RCA cable to transmit the audio signal.
• When needed, connect an input device with a TOSLINK connector to the
SPDIF IN
audio input (6).
• Connect an HDMI cable to the
HDMI OUT
socket (3) on the converter and the HDMI input on your
playback device (e.g. monitor or TV).
•
Connect the converter to a USB port (e.g. on your computer), a USB power supply or a USB hub using
the Micro USB cable included. The
POWER
LED (2) turns red when the converter is supplied with power.
• Due to the current consumption of the converter, a USB port that can deliver a current of 500 mA must be
used (e.g. a USB port directly on your computer or the USB port on a USB hub with its own power supply).
•
Switch on your computer. Turn on your playback device (e.g. monitor or TV) and select the appropriate
input.
• Turn on your loudspeakers and/or audio amplifier. Select the input signal (R/L or S/PDIF) with the
SWITCHER
(4) on the converter.
Maintenance and cleaning
• The device does not require maintenance except for occasional cleaning. Remove the product from the
power supply and the connected devices before cleaning.
• A dry, soft and clean cloth is sufficient for cleaning. Do not use any aggressive detergents as these can
lead to discolouration. Do not press too hard on the surface when cleaning to avoid scratch marks.
•
Dust can be easily removed using a clean long-haired brush and a vacuum cleaner.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste.
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical Data
Power supply ......................................................
5 V/DC (via USB), 500 mA
Operating current
................................................max. 300 mA
Supported VGA resolutions (input)
.....................
800x600@60 Hz / 1024x768@60 Hz /
1152x864@60 Hz / 1280x720@60 Hz /
1280x768@60 Hz / 1280x800@60 Hz /
1280x960@60 Hz / 1280x1024@60 Hz /
1360x768@60 Hz / 1366x768@60 Hz /
1440x900@60 Hz / 1600x1200@60 Hz /
1680x1050@60 Hz / 1920x1080@60 Hz
Supported HDMI resolution (output)
...................
max. 1920 x 1080 Pixels (1080p / 60 Hz)
Input
.................................................................... 1x 3.5 mm jack socket, 1 x Toslink socket,
1x VGA socket
Output
.................................................................
1 x HDMI socket
Input signal
.........................................................
VGA
Supports .............................................................
PAL / NTSC
Input cable length
...............................................
≤15 m (standard VGA cable)
Output cable length
............................................
≤20 m (standard HDMI cable)
Operating conditions
........................................... 0 to +40 °C, 5 - 85 % RH (non-condensing)
Storage conditions .............................................. -20 to +60 °C, 0 - 90 % RH (non-condensing)
Measurements (W x H x D) ................................approx. 70 x 26 x 64 mm
Weight ................................................................approx. 85 g
