These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
HDMI Splitter 1x8
Item no. 41 91 53
Version 06/13
© Copyright 2013 by Conrad Electronic SE.
V1_0613_02-KV
Intended use
This product offers one HDMI input and eight HDMI outputs. Use the HDMI splitter to send one HDMI input
source (i.e. a Blu-ray player, PC) to up to 8 output sources. You can display the same images in 2D and
even in 3D via all connected output devices. The provided external power adaptor supplies the HDMI splitter
with power.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in bathrooms, must be
avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the
product for purposes other than those described above, the product may be damaged. In addition, improper
use can cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and
keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
HDMI® is a registered trademark of HDMI Licensing L.L.C.
Delivery content
• HDMI splitter
• Power adaptor
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The mains outlet must be located near to the device and be easily accessible.
• As power supply, only use the supplied mains adaptor.
• Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging
in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage
of your electricity supplier.
• Never connect or disconnect power adaptors if your hands are wet.
• Never unplug the power adaptor from the mains socket by pulling on the cable; always use the grips on
the plug.
• When setting up the product, make sure that the cable is not pinched, kinked or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them. This poses a risk of injury.
• For safety reasons, disconnect the power adaptor from the mains socket during storms.
• If the wall plug transformer is damaged, do not touch it; there is danger to life from electric shock! First,
switch off the mains voltage to the mains socket to which the wall plug transformer is connected (switch off
at the corresponding circuit breaker or remove the safety fuse, then switch off at the corresponding RCD
protective switch, so that all poles of the mains socket are disconnected). You can then unplug the wall
plug transformer from the mains socket. Dispose of the faulty wall plug transformer in an environmentally
friendly way; do not use it any more. Replace it with a wall plug transformer of the same design.
• Never use the product immediately after it has been brought from a cold room into a warm one. The
condensation generated could destroy the product. The plug-in power supply unit also involves danger to
life by electric shock! Allow the product to reach room temperature before connecting it to the power supply
and putting it to use. This may take several hours.
• This device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous playing material
for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture,
flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and protect it from any
accidental use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
• Also observe the safety and operating instructions of any other devices which are connected to the product.
b) Miscellaneous
• Consult an expert when in doubt about operation, safety or connection of the device.
• Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions, contact our technical
support service or other technical personnel.
Connection and startup procedure
When choosing a cable, please note that there are different types of HDMI cables. In case of
doubt, consult a professional for further information.
Read and follow all instructions included in the user manual for each device to be connected.
Turn off all devices to be connected and make sure they are disconnected from the power
supply.
• Connect the eight HDMI outputs (Output 1 to Output 8) using appropriate HDMI cables to your output
devices, i.e. monitors/televisions.
• The length of the HDMI cable from the splitter’s HDMI output to the output device (i.e. television) may not
exceed 15 m. Otherwise, signal errors may occur or the signal may not be sent at all.
• Connect the HDMI input (Input) to the appropriate output of, for instance, a Blu-ray player, a games
console, etc. The length of the HDMI cable from the splitter’s HDMI input to the input device may not
exceed 15 m.
• Connect the circular connecter of the included power adaptor to the appropriate socket on the HDMI
splitter. Connect the power adaptor to an appropriate power outlet.
• Turn on the HDMI splitter using the on/off switch ON/OFF. The green Power indicator LED lights up. The
HDMI splitter is operational.
• Connect your input device and output devices to the power supply and begin playback.
• On the front of the splitter, the respective status LED lights up when the corresponding output device is
turned on and operational.
Maintenance and cleaning
• Before cleaning, disconnect the product from the connected devices and unplug it from the power outlet.
• There are no components located inside the product you need to maintain. Never open/dismantle the
product.
• Do not use any aggressive cleaning agents, rubbing alcohol or other chemical solutions as they can cause
damage to the housing and malfunctioning.
• To clean the product, a dry, soft and clean cloth is sufficient. Do not apply too much pressure to the housing
as this may cause scratch marks.
• You can easily remove dust using a long-haired, soft and clean brush.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the household waste. At
the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
a) HDMI splitter
Input...........................................................1x HDMI
Output ........................................................8x HDMI
Data rate ....................................................2.25 Gbit/s (per channel)
Supported video resolution ........................up to 1920 x 1080 pixels
Operating conditions ..................................0 to +70 ºC, 10 – 85% RH (non-condensing)
Storage conditions .....................................-10 to +80 ºC, 5 – 90% RH (non-condensing)
Dimensions (W x H x D) ............................270 x 32 x 116 mm
Weight .......................................................760 g
b) Power adaptor
Input voltage / current ................................100 - 240 V/AC, 50/60 Hz, 0.55 A
Output voltage / current .............................5 V/DC, 4 A